Paxton Patterson Fall 2021 Catalog
140 •
TOOL SALES and CUSTOMER SERVICE 1.800.323.8484
60” Technology Education Tool Cabinet
CABINET CONSTRUCTION SPECIFICATIONS: • Maple tool cabinets constructed of solid maple and maple veneers • Cabinet is built with 1” thick plywood sides and 1⁄4” plywood back for strength and durability • Top portion of the cabinet, including the locking doors, is lined with 1⁄4” pegboard; the unit includes the appropriate hook assortment • Bottom portion of the cabinet, including locking doors, contains three adjustable shelves and one fixed bottom for storing large items or tote trays that are included with the cabinet • Overall dimensions: 60”W x 22”D x 84”H • Tool cabinet is shipped assembled; when tools are ordered, they are shipped separately
Stock No. 63-4688 62-0035 72-0068
Description
Each
Tool cabinet without tools Complete set of tools, listed below Tool cabinet, complete with tools
$WEB WEB WEB
SAFETY FIRST - IT IS ESSENTIAL TO FASTEN THE LOCKER TO WALL TO PREVENT IT FROM FALLING FORWARD WHEN DOORS ARE OPENED. NOTE: THERE IS A 4-6 WEEK LEAD TIME ON TOOL LOCKERS
TECHNOLOGY EDUCATION TOOLS (62-0035) • Accommodated by hangers and hooks in upper cabinet
Qty.
Tool(s)
Qty.
Tool(s)
Qty.
Tool(s)
1 6 6 2 6 6 6 2 1 1 6 1 8 2 6 2 2 6 2 3 1 2 2 1 3 1 1 1
Screwdriver, Jewelers, 6 pc. Screwdriver, Phillips Tip, #1 Screwdriver, Phillips Tip, #2
2 1 1 2 1 1 2 1 1 2 1 1 1 2 2 6 2 6 3 1 1
Hammer, Soft Face, 8 oz.
6 1 6 1 1 1 2
Awl, Scratch, Plastic Handle Bar, Wonder, 12-3 ⁄ 8”L Brad Driver, 16-19 Ga.
Hex L-Key Set, Fractional, 18 pc. Hex L-Key Set, Metric, 9 pc. Knife, #52, w/5 Blades Knife, Putty, Stiff, 1-1 ⁄ 4”W Level, Aluminum, I-Beam, 24”L
Screwdriver, Screw Holding, 3 ⁄ 16” Screwdriver, Standard Tip, 1 ⁄ 4” Screwdriver, Standard Tip, 5 ⁄ 16” Screwdriver, Standard Tip, 7 ⁄ 32” Snips, Pattern, Straight, 12”L Socket, Fractional, 1 ⁄ 4” Dr, 15 pc. Socket, Fractional, 3 ⁄ 8” Dr, 12 pc.
12
Caliper, Inside, 6”L Caliper, Outside, 6”L Chisel, Wood, 4 pc.
Clamp, Bar, 24”L, 3-3 ⁄ 16” Depth Clamp, C, 1” Opening, 1” Depth Clamp, C, 2” Opening, 1-1 ⁄ 2” Depth Clamp, C, 3” Opening, 1-3 ⁄ 4” Depth Clamp, C, 6” Opening, 3-1 ⁄ 2” Depth Clamp, Spring, 1”, 1-1 ⁄ 4 Jaw Length Clamp, Spring, 2”, 2-1 ⁄ 4 Jaw Length Compass, Divider, Scriber, 8”D Divider, 6”L, 6-1 ⁄ 4” Opening Drill Bit, HSS, 1 ⁄ 16”-1 ⁄ 2”, 15 pc. Drill Bit, Spade, 1 ⁄ 4”-1”, 13 pc. Continuity Tester
Level, Torpedo, Aluminum Magnetic, 9”L
Mallet, Rubber, 32 oz. Mallet, Tinners, 14 oz.
12 12
Miter Box, w/Saw, Clamping Moto-Tool w/Accessories
6 2
Soldering Iron, 25 Watt Square, Aluminum, 24”L
Multimeter, Digital
12 12
Square, Combination, Stainless, 12”L Square, Try, Stainless, 8” Blade
Nail Set, 1 ⁄ 32”,1/16”,3 ⁄ 32”
Nut Driver, 7 pc.
6 1 1 1 1 2 6 6 6 6 1 8 1 1 6 2 1
Stripper, Wire Cutter, 8-1 ⁄ 4”L
Pliers, Diagonal Cutting, 6”L Pliers, Locking, Curved, 10”L Pliers, Long Chain Nose, 6”L Pliers, Needle Nose, Locking, 9”L
Surform, File Surform, Plane
Surform, Shaver 7-1 ⁄ 4” Tape Rule, 1” x 25’ T-Bevel, Sliding, 10” Tester, Multifunction
Drill, Cordless, 1 ⁄ 2”, 12V
Pliers, Slip Joint, 6”L Power Strip, 6 Outlet Punch & Chisel, 8 pc. Ruler, Steel, 12”L Saw, Back, 9”L Saw, Compass, 12”L Rivet, Tool, w/Accessories
File, Card & Brush Cleaner, 10”L File, Half Round, Smooth, 10”L
Vise, Clamp-on, 2-7 ⁄ 8” Opening Vise, Swivel, 2-3 ⁄ 4” Opening
File, Handle, #5
16 12
File, Handy, Single Cut, 8”L Glue Sticks, 7 ⁄ 16”, pk/235 Gun, Glue, 7 ⁄ 16”, 40 Watts Hammer, Ball Pein, 16 oz. Hammer, Ball Pein, 8 oz. Hammer, Curved Claw, 7 oz. Hammer, Curved Claw,16 oz. Hammer, Dead Blow, 10 oz.
Wrench, Adjustable, 12” Wrench, Adjustable, 6”
2 6 3 1
Wrench, Combination, 1 ⁄ 4”-3 ⁄ 4”, 9 pc. Wrench, Combination, 10mm-18mm, 9 pc. Wrench, Micrometer Torque, 3 ⁄ 8” Dr
Saw, Coping, Pin End, 6-1 ⁄ 2”L Saw, Hack, Adjustable, 10” or 12”
Saw, Hand, Cross Cut, 26”L
10
Yardstick, Aluminum
12
Scissors, Straight, 8”L
2
Screwdriver, Cordless, Pivot, 4V
Made with FlippingBook Digital Publishing Software