Paxton Patterson Fall 2021 Catalog

278 •

TOOL SALES and CUSTOMER SERVICE 1.800.323.8484

Hegner Scroll Saw •  A parallel-arm design that has a slight horizontal cutting motion as well as vertical which helps eliminate almost all teeth marks and saves on sanding time •  Patented knife-edge blade clamps reduce the stress on blades for less breakage and faster cutting •  Tandem movement of the parallel arm results in a faster cutting action •  Fully slotted dual-tilt table for fast blade changing and easy inside cutting

Rikon 16” Variable Speed Scroll Saw •  1.2A, 120V, 1 phase, DC variable speed motor, 550-1,650 SPM •  5” blade length, accepts both plain and pin end blades, 19⁄32” cutting stroke •  Throat depth: 15-3⁄4” •  Maximum cut: 2”H •  10-1⁄16” x 15-5⁄16” table, tilts to 45° •  1-3⁄8” diameter dust port •  Includes: saw, work light, dust blower, pair of tool-less blade holders, safety shield and one plain end blade Stock No. 49-0716 Mfr. No. 10-600VS . . . . . . . . . . . . . . . . $WEB

HEGNER MULTI MAX-18-V •  2.83A, variable speed; 400-1700 strokes per minute, 18” throat •  Lower, up-front on/off switch, fixed dust blower •  7⁄8” stroke length, 2-5⁄8” cutting depth, blade clamps uses Tuffwrench TM tool, requires 5” or 5-1⁄8” plain end blades •  Pivoting upper arm for reduced vibration •  Cast iron 9” x 17” slotted table, tilts 0 to 45° HEGNER POLYMAX-3 •  2.83A, variable speed; 400- 1700 strokes per minute, 19-5⁄8” throat •  Lower, up-front on/off switch, fixed dust blower •  7⁄8” stroke length, 2-5⁄8” cutting depth, blade clamps uses Tuffwrench TM tool, requires 5” or 5-1⁄8” plain end blades •  Pivoting upper arm for reduced vibration •  Cast iron 9” x 17” slotted table, tilts 0 to 45°

Jet 18” Variable Speed Scroll Saw •  1.3A, 120V, 1Ph, variable speed motor 400-1500 SPM

•  Tilting arm: right 45°. Left 30°, spring loaded arm raises 10” and stays up until pulled down •  3⁄4” stroke length, 2” maximum cutting depth, uses standard 5” long plain end blades, 18” throat capacity

•  Includes: saw, assembled stand, 76 assorted blades and Tuffwrench TM Stock No. 17-0000 Mfr. No. P3/P3ST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $WEB

•  Large 21”W x 11-5⁄8”L steel table provides a stable working surface and reduces vibration •  Slotted table for easier and quicker blade changes •  Removable tool-less lower blade holder snaps quickly and securely into place •  Upper blade holder clamps and tensions blade in one step •  Removable 2-1⁄2” dust port on underside of table to collect dust at the source •  Includes: saw, material hold down, extra lower blade holder, onboard dust blower Stock No. Mfr. No. Model No. Description Each 49-1459 727300B JWSS-18B Benchtop Model $WEB 49-1461 727300K JWSS-18B Scroll Saw and Stand WEB

•  Includes: saw, assembled stand, 76 assorted blades and Tuffwrench TM Stock No. 16-4570 Mfr. No. M18V/M2ST(2 CTN) . . . . . . . . . . $WEB

DeWalt 20” Variable Speed Scroll Saw •  1.3A, electronic variable speed; 400-1750 strokes per minute

L.E.D. Lamp for Henger Scroll Saws

•  Front upper arm on/off switch, flexible dust blower and blade tensioning lever

•  9 watt dimmable L.E.D. modules •  Step dimming 1-50-100% •  Die-cast aluminum housing •  Optics: 3-diopter (1.75x), 5” diameter lens •  Supplied with cable and plug •  Edge clamp mounting •  Color: light grey

•  3⁄4” stroke length, depth of cut, 2”; tool-free blade clamp, requires 5” plain end blades •  Upper arm lifts for blade changing, parallel arm design reduces vibration •  Oversized cast iron table, tilts left and right 45° •  Includes: saw, hex wrench and blades Stock No. 49-0466 Mfr. No. DW788 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $WEB

Stock No. 16-0550 Mfr. No. LFG028214 . . . . . . . . . . . . . . . $WEB

DeWalt Scroll Saw Stand

Tuffwrench™

•  All steel construction •  Adjustable legs •  Designed for use with DeWalt 20” Scroll Saw

•  For blade clamp screws with square heads

Stock No. 16-4434 . . . . . . . . . . . . . . . . . . . . . . . $WEB Tuffscrew Blade Clamp Replacement Screw •  Square head, blade clamp screws for use with Tuffwrench TM Stock No. 16-4956 . . . . . . . . . . . . . . . . . . . . . . . $WEB

Stock No. 18-2988 Mfr. No. DW7880 . . . . . . . . $WEB

DeWalt Scroll Saw Worklight

0.7mm Slot Blade Clamp •  Two required per blade assembly; sold per each •  Can be used with blades up to .027˝ thick •  Requires 16-4434 Tuffwrench TM ( not included ) Stock No. 16-4560 Mfr. No. CLO.7 . . . . . . . . . . . . . . . . . . $WEB

•  Flexible neck for easy positioning •  25 watt bulb included •  Designed for use with DeWalt 20” Scroll Saw

Stock No. 18-2990 Mfr. No. DW7881 . . . . . . . . $WEB