Paxton Patterson Fall 2021 Catalog

328 •

TOOL SALES and CUSTOMER SERVICE 1.800.323.8484

Delta Heavy-Duty Bench Top Oscillating Spindle Sander •  1⁄2 HP, 115V, 1 Ph, 1,725 RPM spindle speed •  29 oscillations per minute, 15⁄16” oscillation stroke •  14-3⁄4” x 14-3⁄4” table top, tilts 0° to 45° •  Uses 5-1⁄2” length sleeves •  Positive stop at 90° and large bevel scale for accuracy and convenience •  Built-in 2” dust port •  On-tool storage for all inserts, spindles and wrenches •  Uses 5-1⁄2” length sleeves

Jet Oscillating Spindle Sander Model JOSS-S •  1HP, TEFC, 115/230V (pre-wired 115V), 1Ph, 1720 RPM motor •  75 oscillations per minute, 1-1⁄2” oscillation stroke •  24-1⁄2” x 24-1⁄2” cast-iron table, tilts 45° forward, 15° back, locks at any point in between, 90° quick index returns table to level, table height: 39-3⁄16” •  One piece steel stand, motor is mounted independently inside the base for easy access and service •  Baffles under the table create a chamber under Delta Heavy-Duty Floor Oscillating Spindle Sander •  1 HP, 115V, 1 Ph, 1,725 RPM spindle speed •  71 oscillations per minute, 1-1⁄2” oscillation stroke •  24-5⁄8” x 24-1⁄2” precision ground cast-iron table •  Unique 0° to 45° tilting spindle arbor design allows for adjusting the sanding angle to bevel sand while the table remains level •  Adjustable positive stops at 45° and 90° and large bevel scale for accuracy and convenience •  Built-in 4” dust port •  Heavy-duty, cast-iron trunnion system supports oil bath gear box, and also provides increased stability and accuracy •  Removable rear access panel making spindle adjustments and changes easier •  Uses 6” and 9” length sleeves •  On-tool storage for all inserts, spindles and wrenches

Jet Bench Top Oscillating Spindle Sander Model JBOS-5 •  1⁄2 HP, 115V, 1 Ph, 1725 RPM motor •  30 oscillations per minute, 1” oscillation stroke •  14-1⁄2” x 14-1⁄2” table top, tilts 45° •  Removable on/off switch prevents accidental start-up •  Built-in 2” dust port and spindle storage racks •  Uses 5-1⁄2 and 6” length sleeves •  Includes: sander, 1⁄4”, 1⁄2”, 5⁄8”, 1-1⁄2” •  Includes: sander, five interchangeable threaded spindles with 100 grit sanding sleeves (1⁄4”, 1⁄2”, 5⁄8”, 1-1⁄2” and 2”), rubber drums on 1-1⁄2” and 2” spindles, four inserts, power lock-off pin, 2-1⁄4” to 4” dust port adaptor and three wrenches Stock No. 49-0802 Mfr. No. 31-483 . . . . . . . . . . . . . . . . $WEB

•  Includes: sander, ten interchangeable threaded spindles with 100 grit sanding sleeves (1⁄4”, 3⁄8”, 1⁄2”, 5⁄8”, 3⁄4”, 1”, 1-1⁄2”, 2”, 3” and 4”), six inserts, power lock-off pin and two wrenches Stock No. 49-0803 Mfr. No. 31-484 . . . . . . . . . . . . . . . $WEB

and 2” spindle assemblies, two round table inserts and two oblong table inserts Stock No. 49-0284 Mfr. No. 708404 . . Clesco Abrasive Sleeves •  For drum and spindle sanders Stock No. Diameter Length

$WEB

Grit

Each

ALUMINUM OXIDE RESIN CLOTH 52-0193 1 ⁄ 4”

5-1 ⁄ 2” 5-1 ⁄ 2” 5-1 ⁄ 2”

120

$WEB WEB WEB

52-0192 52-0191 52-0169 52-0168 52-0167 52-0175 52-0174 52-0173 52-0178 52-0177 52-0176 52-0184 52-0183 52-0182 52-0163 52-0162 52-0161 52-0196 52-0195 52-0194 52-0204 52-0202 52-0200 52-0223 52-0221 52-0219 52-0235 52-0233 52-0231 52-0151 52-0150 52-0149 52-0166 52-0165 52-0164 52-0172 52-0171 52-0170

1 ⁄ 4” 1 ⁄ 4” 3 ⁄ 8” 3 ⁄ 8” 3 ⁄ 8” 5 ⁄ 8” 5 ⁄ 8” 5 ⁄ 8” 5 ⁄ 8” 5 ⁄ 8” 5 ⁄ 8” 1 ⁄ 2” 1 ⁄ 2” 1 ⁄ 2” 3 ⁄ 4” 3 ⁄ 4” 3 ⁄ 4”

80 50 80 50 80 50 80 50 80 50 80 50 80 50 36 80 50 80 50 80 50 80 50 80 50 80 50

the table for improved dust collection, 4” dust collection port requires a minimum of 300 CFM •  Uses 6” and 9" length sleeves •  Includes: sander, ten removable spindles; 1⁄4”, 3⁄8”, 1⁄2”, 5⁄8” and 3⁄4” in steel, 1”, 1-1⁄2”, 2”, 3’ and 4” in rubber, abrasive sleeves, table inserts and spindle wrench Stock No. 49-0621 Mfr. No. 723950 . . . . . . . . . . . . . . . $WEB Jet Aluminum Oxide Abrasive Sleeves •  Fits Jet JBOS-5 and General Machinery 15-220 Bench Top Spindle Sander Stock No. Mfr. No. Description Pkg/4 52-0313 575894 1 ⁄ 4” x 6”, 150 grit $WEB 52-0312 575893 1 ⁄ 4” x 6”, 100 grit WEB 52-0311 575891 1 ⁄ 4” x 6”, 60 grit WEB 52-0316 575904 1 ⁄ 2” x 6”, 150 grit WEB 52-0315 575903 1 ⁄ 2” x 6”, 100 grit WEB 52-0314 575901 1 ⁄ 2” x 6”, 60 grit WEB 52-0319 575909 5 ⁄ 8” x 6”, 150 grit WEB 52-0318 575908 5 ⁄ 8” x 6”, 100 grit WEB 52-0317 575906 5 ⁄ 8” x 6”, 60 grit WEB 52-0322 575924 1-1 ⁄ 2” x 5”, 150 grit WEB 52-0320 575923 1-1 ⁄ 2” x 5”, 100 grit WEB 52-0321 575921 1-1 ⁄ 2” x 5”, 60 grit WEB 52-0325 575934 2” x 5-1 ⁄ 2”, 150 grit WEB 52-0324 575933 2” x 5-1 ⁄ 2”, 100 grit WEB 52-0323 575931 2” x 5-1 ⁄ 2”, 60 grit WEB Stock No. Mfr. No. Description Pkg/3 52-0237 575954 4” x 9”, 150 grit WEB 52-0239 575953 4” x 9”, 100 grit WEB 52-0241 575952 4” x 9”, 60 grit WEB

6” 6” 6”

120

WEB WEB WEB WEB WEB WEB WEB WEB WEB WEB WEB WEB WEB WEB WEB WEB WEB WEB WEB WEB WEB WEB WEB WEB WEB WEB WEB WEB WEB WEB WEB WEB WEB WEB WEB WEB

5-1 ⁄ 2” 5-1 ⁄ 2” 5-1 ⁄ 2”

120

6” 6” 6” 6” 6” 6” 9” 9” 9” 9” 9” 9”

120

120

120

1” 1” 1”

1-1 ⁄ 2” 1-1 ⁄ 2” 1-1 ⁄ 2” 1-1 ⁄ 2” 1-1 ⁄ 2” 1-1 ⁄ 2”

5-1 ⁄ 2” 5-1 ⁄ 2” 5-1 ⁄ 2”

120

9” 9” 9”

120

5-1 ⁄ 2” 5-1 ⁄ 2” 5-1 ⁄ 2”

2” 2” 2” 2” 2” 2” 3” 3” 3” 3” 3” 3”

120

9” 9” 9”

120

5-1 ⁄ 2” 5-1 ⁄ 2” 5-1 ⁄ 2”

120

9” 9” 9”

120

ADDITIONAL SANDING SLEEVES - PAGE 401